A13-OLinuXino-WIFI

Acest produs este in acest moment in stocul Robofun, livrarile se fac in termen de cel mult cateva zile de la plasarea comenzii.   

A13-OLinuXino este un mini-calculator in forma extrem de compacta, capabil sa ruleze Linux  (similar cu placa Raspberry PI, dar cu performante mai ridicate decat aceasta).

• A13 Cortex A8 processor at 1GHz, 3D Mali400 GPU
• 512 MB RAM (2 x 256Mbit x 8)
• 6-16VDC input power supply, noise immune design
• 4GB NAND flash
• 3 + 1 USB hosts, 3 available for users 1 for WIFI RTL8188CU 802.11n 150Mbit module on-board
• 1 USB OTG which can power the board
• Battery option and connector
• Android OS ready to use in the NAND memory
• SD-card connector for booting optional Linux image
• VGA video output
• LCD signals available on connector so you still can use LCD if you diasble VGA
• Audio Output
• Microphone Input
• 4 Mount holes
• RTC PCF8536 on board for real time clock and alarms
• 5 Keys on board for android navigation
• UEXT connector for connecting addtional UEXT modules like Zigbee, Bluetooth, Relays, etc
• GPIO connector with 68/74 pins and these signals:
  • 17 for adding another NAND flash;
  • 22 for connecting LCDs;
  • 20+4 including 8 GPIOs which can be input, output, interrupt sources;
  • 3x I2C;
  • 2x UARTs;
  • SDIO2 for connecting SD cards and modules;
  • 5 system pins: +5V, +3.3V, GND, RESET, NMI
• Dimensions: 120 x 120 mm (4.7x4.7'')
• Optional low-cost 7" LCD with touchscreen

Documentatie:

• Manual de Utilizare
• Articole despre OlinuXino (de la producatorul placii)

Hardware:

• https://github.com/OLIMEX/OLINUXINO

Software:

• https://github.com/OLIMEX/OLINUXINO
• Instructiuni Build Debian aici (sau cumpara direct un card functional) 
• Open Embedded layer completed cu suport pentru iMX233-OLinuXino
• Android build on iMX233 instructions (spaniola)
• OpenOCD working script for iMX233
• Emulation of OLinuXino

Comunitate:

• OLinuXino Yahoo Group
• Freenode #olimex irc channel